 |
Our Products Top > WAD-Type: For waste gas containing high temperature and high density dust |
|---|
WAD-Type: High temperature and with large dust content
YOSHIMINE WASTE HEAT RECOVERY BOILER
We have already manufactured and delivered various kinds of our waste heat boilers, and its number has reached about 100. Our waste heat boilers can meet the demand and requirement of customer, and we can sell them with confidence.
1. Possible to run without decreasing its efficiency for a long period, as its heating surface can keep off dirt.
2. Various optimum kinds of type are arranged in compliance with the nature of waste gas.
3. Easy to run and maintain
4. Possible to endure the heat gain fluctuation
5. Installation area is small.
FEATURES OF PRODUCTS
- ･SINGLE-DRUM TYPE NATURAL CIRCURATION BOILER
- Boiler design is Single-drum and natural circulation type. It is excellent at gas tight because of membrane structure.
- ･HIGHT TEMPERATURE GAS AND WITH LARGE DUST CONTENT
- Applicable for such higher temperature waste gas as from the municipal waste incinerator, which have large gas volume, large dust content.
- ･PREVENTION OF DUCT ADHESION
- Possible to run continuously for a long time. Even if the clinkers stick to water screen, it can remove the clinker naturally, and that, the boiler performance may not decline.
- ･ARRANGEMENT
- Possible to install at both top and back of the incinerator.
- ･EASY DUST REMOVAL
- Draft loss is small, and convection part can remove the dust by steam type soot blower or hammering machine easily.
- ･4MPa - 400degC
- Superheater is free to be located. So steam condition can apply to be 4 MPa and 400 deg.C.
SPECIFICATION
●APPLICATION●
For the municipal waste incinerator, or the waste gas with large dust content
●APPLICABLE RANGE●
Gas temperature at inlet Less than 1200oC
Nature of dust Larger dust content with tenacity
Incineration volume for municipal waste More than 120 ton/24 hour
CONSTRUCTION
- WA-Type: For waste gas containing high temperature and high density dust
- WAD-Type: For waste gas containing high temperature and high density dust
- WB-Type: For waste gas containing little dust
- WD-Type: For waste gas containing medium density dust
